--- title: Capturing screen content on iOS framework: ScreenCaptureKit role: sampleCode role_heading: Sample Code platforms: [iOS 27.0+, iPadOS 27.0+, Mac Catalyst 27.0+, xcode 27.0+] path: screencapturekit/capturing-screen-content-on-ios --- # Capturing screen content on iOS Record and share screen captures on iOS by presenting the system content-sharing picker. ## Overview Overview This sample shows how to capture screen content on iOS using ScreenCaptureKit. ScreenCaptureKit supports screen streaming and mirroring on all available platforms. You present the system content-sharing picker to let a person choose between capturing the entire display or content from within the sample, then stream that content with fine-grained control over audio, recording, and the camera. You use the sample to record the screen to a file, to buffer up to 15 seconds of rolling video and export a clip on demand, and to show a live camera preview during in-app captures. When a recording finishes, the sample saves the file to Photos and offers it through the standard share sheet. note: This sample requires a device running iOS 27 or later. The sample requests camera and photo library access at runtime. Configure the sample code project The sample declares two background modes so ScreenCaptureKit continues to run while the app isn’t frontmost: screen-capture in UIBackgroundModes, so the stream survives backgrounding for full-display capture. audio, so the microphone tap keeps producing samples. The Info property list also declares NSCameraUsageDescription and NSPhotoLibraryAddUsageDescription. Verify both prompts appear the first time you exercise the in-app capture and recording flows. Present the content-sharing picker The sample offers two entry points into the system picker: a full-display capture and an in-app capture. Both configure the shared SCContentSharingPicker and register an observer before presenting the picker, so the app receives the resulting SCContentFilter regardless of which mode the person chooses. For full-display capture, the sample calls present(). For in-app capture, it calls presentForCurrentApplication(), which limits the picker to windows and layers owned by the running app. func presentFullDisplayPicker() { picker.defaultConfiguration = fullDisplayPickerConfiguration activatePicker() captureMode = .fullDisplay picker.present() } func presentInAppPicker() { picker.defaultConfiguration = inAppPickerConfiguration activatePicker() captureMode = .inApp picker.presentForCurrentApplication() } Activating the picker registers the sample’s SCContentSharingPickerObserver, so the app receives the selected filter through contentSharingPicker(_:didUpdateWith:for:) and starts the stream from that callback. Configure the picker’s controls The sample uses two SCContentSharingPickerConfiguration instances so it can tailor the picker to each capture mode. Both configurations allow toggling the microphone; only the in-app configuration enables the camera toggle, because ScreenCaptureKit doesn’t support a camera overlay for full-display captures. var fullDisplayPickerConfiguration: SCContentSharingPickerConfiguration { var config = SCContentSharingPickerConfiguration() config.showsMicrophoneControl = showsMicrophoneControl return config } var inAppPickerConfiguration: SCContentSharingPickerConfiguration { var config = SCContentSharingPickerConfiguration() config.showsMicrophoneControl = showsMicrophoneControl config.showsCameraControl = showsCameraControl return config } The picker records the person’s choices in the returned filter’s isMicrophoneEnabled and isCameraEnabled properties, which the sample checks when it attaches stream outputs. Start a stream from the filter Once the picker returns a filter, the sample tears down any prior stream and builds a fresh SCStream with a new SCStreamConfiguration. Screen frames flow through an output attached with the SCStreamOutputType.screen type. The sample attaches a microphone output only when the filter’s isMicrophoneEnabled is true, mirroring the person’s selection in the picker. let newStream = SCStream(filter: filter, configuration: config, delegate: self) // Add screen stream output for every new stream. try newStream.addStreamOutput(self, type: .screen, sampleHandlerQueue: .main) if filter.isMicrophoneEnabled { try newStream.addStreamOutput(self, type: .microphone, sampleHandlerQueue: .main) } ... try await newStream.startCapture() Before starting a full-display capture, the sample activates an AVAudioSession in the playAndRecord category so the microphone tap keeps producing samples while the app runs in the background. Record the stream to a file The sample uses SCRecordingOutput to encode the stream directly to an MP4 file, so the code doesn’t need to handle sample buffers manually. It configures an output URL in the temporary directory through SCRecordingOutputConfiguration, adds the output to the running stream, and lets ScreenCaptureKit encode the file in place. let config = SCRecordingOutputConfiguration() config.outputURL = outputURL ... let output = SCRecordingOutput(configuration: config, delegate: delegate) try stream.addRecordingOutput(output) When the person stops the recording, the sample removes the output and awaits its finalization through a CheckedContinuation. The delegate’s recordingOutputDidFinishRecording(_:) callback resumes the continuation, at which point the sample hands the file to Photos. The Recent tab later reads recordedDuration and recordedFileSize from the finished SCRecordingOutput to display the recording’s duration and size. Save clips from a rolling buffer For quick clips, the sample attaches an SCClipBufferingOutput to the same stream. The buffering output holds up to 15 seconds of rolling capture in memory without writing anything to disk. When the person taps Export Current Clip, the sample asks the output to write the most recent N seconds to a file. let output = SCClipBufferingOutput(delegate: delegate) try stream.addClipBufferingOutput(output) ... // Later, in response to a user action: output.exportClip(to: clipURL, duration: duration) { [weak self] error in ... // Save the clip to Photos on success. await self?.saveClipToPhotos(url: clipURL) ... } Exporting a clip doesn’t interrupt buffering, so the person can capture overlapping clips while the buffer continues to accumulate new frames. Preview the camera during capture In-app capture mode supports an overlay of the device’s camera. When the filter’s isCameraEnabled is true, the sample attaches an SCVideoEffectOutput and stores the UIView the output vends. A UIViewRepresentable wrapper embeds that view in the SwiftUI hierarchy so it renders as a floating rounded rectangle anchored to the bottom-trailing corner of the app. if captureMode == .inApp && filter.isCameraEnabled, let device = AVCaptureDevice.default(.builtInWideAngleCamera, for: .video, position: .front) { let effectOutput = SCVideoEffectOutput(cameraDevice: device) try newStream.addVideoEffectOutput(effectOutput) videoEffectOutput = effectOutput } The sample re-attaches the preview when the app returns to the foreground, because the camera view’s underlying capture session pauses on backgrounding. Save recordings to Photos When a recording or clip finishes, the sample writes it to Photos through PHPhotoLibrary. Because the sample only writes to Photos, it requests the narrower PHAccessLevel.addOnly authorization scope rather than full library access — the data-minimization pattern of requesting only what the feature needs. The sample hands the file off with shouldMoveFile set to true so the temporary file doesn’t linger on disk. let status = await PHPhotoLibrary.requestAuthorization(for: .addOnly) guard status == .authorized || status == .limited else { return } ... try await PHPhotoLibrary.shared().performChanges { let options = PHAssetResourceCreationOptions() options.shouldMoveFile = true let request = PHAssetCreationRequest.forAsset() request.addResource(with: .video, fileURL: url, options: options) } The Recent tab surfaces the last saved recording and clip and exposes both through ShareLink, so the person can pass a file to another app without leaving the sample. ## See Also ### Essentials - [ScreenCaptureKit updates](updates/screencapturekit.md) - [Persistent Content Capture](bundleresources/entitlements/com.apple.developer.persistent-content-capture.md) - [Capturing screen content in macOS](screencapturekit/capturing-screen-content-in-macos.md)